Bluetooth Beacon with New chip 3431 broadcast UUID, Major Minor reach 80 meters 3M glue IP67 acceleration sensor
Model Name: ITBB803-PA
Bluetooth beacon ITBB803_standard_3431_waterproof_acceleration
Product Overview
We designed our own APK/APP for our Bluetooth beacon, it’s simple and easy to use, and compatible with all smartphones, so customer can use our APK/APP to do setting of the Bluetooth beacon quickly and easily
Most products of Bluetooth beacon are made by Nordic chipset in the market, we also have our Nordic 52832 and 52810 Beacon, but now days Nordic chipset supply is a big problem and price rise very high. In this case our company is the first to successfully adopt the domestic Bluetooth chipset in beacon products, after several months development, we successfully designed the beacon with domestic chipset and achieve the same performance, so even the bad covid situation may still last for years and chipset supply problem still exist we are capable to provide our customer more choices we can deliver with same quality beacon but lower cost and importantly no supply issue.
Our main strength is Technology, not the product quantity, our engineer can develop any beacon products for customer with short time, from ID/MD design to tooling, Hardware and Software design and PCB manufacturing, with this experienced engineer team we can deliver to our clients best customization product with quickest time.
This Bluetooth beacon is designed by our engineer team which has more than 10 years experiences in this area, especially the RF design, our beacon product has the best performance of the antenna design compared with the most beacon product in the market.
. Bluetooth beacon based on low power Bluetooth chip
. Powered by two ER14250 batteries and can be used for up to 5 years
. Broadcast UUID, Major, Minor, RSSI, battery power, Bluetooth name, Bluetooth MAC address
. Beacon parameters can be set through the mobile phone APP
. Broadcast distance can reach 80 meters
. Using 3M glue can be easily installed and fixed
. Firmware have connect type and non-connect type
. With temperature and humidity sensor and acceleration sensor optional
. With unique design for IP67 protection
. CE, RoHS, FCC, KC compliance
. With acceleration sensor
Specification:
Hardware Parameters
| Hardware parameters |
| Antenna |
PCB Antenna |
| Battery |
ER14250 2*1200mAh |
| Voltage |
3.6V |
| Dimensions (D×H) |
53.86*24.93mm |
| Wireless Performance |
| Wireless standard |
Bluetooth ® 4.2 |
| Frequency range |
2400MHz---2483.5MHz |
| Data rate |
1Mbps |
| Modulation mode |
GFSK Modulation |
| Encryption |
AES HW Encryption |
| Transmission power |
Tx Power -20 to +4 dBm in 4 dB Steps |
| Reveiving sensitivity |
-93dBm at 1 Mbps BLE |
| Work mode |
Peripheral |
| Other |
|
Environment
|
Working temperature: -40℃~85℃ |
| Storage temperature: -40℃~85℃ |
| Working humidity: 10%~90% Non-condensing |
| Storage humidity: 5%~90% Non-condensing |
| Temperature and humidity indicators(for Bluetooth beacons with temperature and humidity sensors) |
| Measurement accuracy of humidity |
±1.5 %RH |
| Humidity measurement resolution |
0.01 %RH |
| Temperature measurement accuracy |
±0.1 ℃ (20℃-60℃) |
| Temperature measurement resolution |
0.015 ℃ |
| Temperature measurement range |
-40~125 ℃ |
Product Tags:
|
|
IP67 BLE Sensor Beacon , 2400MHz Bluetooth Low Energy Beacon Images
|
